The K35 is a single-acting, two-piece rod seal made of a special PTFE profile ring and an O-ring to create the initial preload.
IranSeal's sales team is ready to answer your questions about price and availability for this product.
The K35 is a single-acting, two-piece rod seal made of a special PTFE profile ring and an O-ring to create the initial preload.
Can be used in injection machinery, forklifts, loading platforms, cranes, agricultural machinery, hydraulic hammers and servo cylinders.
| Ambient temperature | Pressure (bar) | Speed (m/sec) | Fluid |
|---|---|---|---|
| -30°C to +105°C | ≤400 bar | ≤0.5 m/sec | Mineral oils (DIN 51524) |
| +5°C to +60°C | ≤400 bar | ≤0.5 m/sec | HFA and HFB |
| -30°C to +60°C | ≤400 bar | ≤0.5 m/sec | HFC |
Before buying, measure the current part with calipers and match it against the specification table: inner diameter (ID) at the shaft contact surface, outer diameter (OD) at the housing seat, and thickness (height) measured perpendicular to these two diameters. If you're unsure about the size or lip type, send the old part's code or a photo of it to IranSeal's sales team so they can find the exact match.
K01The K01 is a single-acting, seven-piece seal set consisting of: a back-up ring of reinforced cotton fabric, a thermoplastic heat-resistant head ring, three middle rings of…
Ask for price
K04The K04 is a single-acting, seven-piece sealing assembly consisting of: a back-up ring of reinforced cotton fabric, a thermoplastic head ring, three middle rings of…
Ask for price
K21The K21 is a single-acting seal for both pistons and rods; with its symmetrical lip design it can be used in both rod and piston applications.
Ask for price
K22The K22 is a single-acting rod seal designed with an inner lip shorter than the outer lip for optimal performance in rod applications.
Ask for price