The K51 is a single-acting rod seal for pneumatic systems, designed so that axial installation in the housing needs no additional part such as a retaining ring.
IranSeal's sales team is ready to answer your questions about price and availability for this product.
The K51 is a single-acting rod seal for pneumatic systems, designed so that axial installation in the housing needs no additional part such as a retaining ring.
Pneumatic cylinders
| Ambient temperature | Pressure (bar) | Speed (m/sec) | Fluid |
|---|---|---|---|
| From -30 °C to °C +80 | Up to 16 bar | Up to 1.0 m/s | Compressed air, dry and filtered, oil-free |
Before buying, measure the current part with calipers and match it against the specification table: inner diameter (ID) at the shaft contact surface, outer diameter (OD) at the housing seat, and thickness (height) measured perpendicular to these two diameters. If you're unsure about the size or lip type, send the old part's code or a photo of it to IranSeal's sales team so they can find the exact match.
K130The K130 is a single-acting seal for pneumatic rods, made of NBR rubber.
Ask for price
K30The K30 is a single-acting combined seal and wiper made of a metal part with elastomeric nitrile rubber (NBR) produced using special methods.
Ask for price
K52The K52 is a single-acting pneumatic seal with a wiping function that keeps foreign particles out of hydraulic cylinders. The lip design of this part…
Ask for price
K53The K53 is a pneumatic cushioning seal whose special design, with a spacer base and flow passages, provides effective cushioning at the end of the stroke of pneumatic cylinders.
Ask for price